Samsung RH22H8010SR/AA Manuel D’Utilisation

English - 23

OPERA

TING

Water filter usage
This icon lights when you need to change 
the filter, usually after the refrigerator has 
dispensed about 300 gallons of water 
(after about 6 months).  
After you install the new water filter, reset 
the filter indicator by touching and holding 
the Hold 3sec for Filter Reset button for 3 
seconds.

 

- If water is not dispensing or dispensing 

slowly, you need to replace the water 
filter because the water filter is clogged.

 

- Some areas have large amounts of lime 

in their water, which causes the water 
filter to clog more quickly.  
If this is the case in your area, you will 
need to change the water filter more 
frequently than every six months.

 

- North American (US and Canadian) 

Models Only:

Cooling Off mode (also called Shop mode), 
is designed for use by retailers when they 
are displaying refrigerators on the shop 
floor. 
In Cooling Off mode, the refrigerator’s 
fan motor and lights work normally, but 
the compressors do not run, and the 
refrigerator and freezer do not get cold. 
To start Cooling Off mode, touch and hold 
the Lighting button and the Freezer button 
for 5 seconds during normal operation. 
The refrigerator chime sounds and the 
temperature display flashes OFF. 
To cancel Cooling Off mode, touch and 
hold the Lighting and the Freezer buttons 
again for 5 seconds.

If your refrigerator appears to be working, but 
it is not cooling, and the Freezer and Fridge 
Temperature Indicators are moving, the Fridge is in 
Cooling Off mode. 
To cancel Cooling Off mode, follow the directions 
above.

DA68-03015N-02.indb   23

2014. 5. 14.   �� 9:17