Samsung HT-J4500/ZA Manuel D’Utilisation
18
- English
Settings
✎
If you don't press any buttons while recording,
the screen saver will be enabled.
the screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
even if you change the volume or press the
MUTE
button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of
the file which has already been recorded may
not play back.
during the recording process, the portion of
the file which has already been recorded may
not play back.
✎
Recording will not start if the remaining free
space in the USB storage device is less than
2MB.
space in the USB storage device is less than
2MB.
✎
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message
is displayed and the recording stops.
space (under 2MB), the appropriate message
is displayed and the recording stops.
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
theater's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure
that follows.
follow the instructions below to configure the home
theater's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure
that follows.
!
Before you begin, confirm that the product is
connected to your router with a network cable.
connected to your router with a network cable.
Ğ
Automatic
To start the configuration process, follow these
steps:
1. In the Home menu, select Settings, and then
steps:
1. In the Home menu, select Settings, and then
press the v button.
2. Select Network, and then press the v button.
3. Select Wired Network Settings, and then press
3. Select Wired Network Settings, and then press
the v button.
The Wired Network Settings screen appears.
4. Press the + button on the Internet Protocol
Setup menu.
Use $% button to select Auto, and then press
the v button.
Settings
Picture
Sound
Sound
Network
System
Language
Security
General
Support
Language
Security
General
Support
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Wired Network Settings
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
> Move " Select ' Return
5. The Network function acquires and fills in
the values for IP Address, Subnet Mask, etc.,
automatically.
6. After the Network function has acquired the
network values, press the
RETURN
button.
7. Select Network Test, and then press v. The
home theater validates the network connection.
When it is done, press the
When it is done, press the
RETURN
button.
Ğ
Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually. You can get the
Network Settings from your Internet Service Provider
(ISP).
procedure does not work, you’ll need to set the
Network Settings values manually. You can get the
Network Settings from your Internet Service Provider
(ISP).
Settings
Picture
Sound
Sound
Network
System
Language
Security
General
Support
Language
Security
General
Support
0
0
0
0
255 255 255 0
0
0
0
0
0
0
0
0
Wired Network Settings
Internet Protocol Setup
: Manual
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Manual
DNS Server
:
> Move " Select ' Return
1. Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto in
Step 4.