Samsung RH22H9010SR/AA Manuel D’Utilisation

Page de 136
English - 19
SETTING
 UP
INSTALLING THE WATER 
DISPENSER LINE 
A water dispenser is one of the helpful features on 
your new Samsung Refrigerator. 
To help promote better health, the Samsung water 
filter removes unwanted particles from your water. 
However, it does not sterilize or destroy 
microorganisms. 
You may need to purchase a water purifying 
system to do that. 
The water line also connects to the ice maker. 
For the ice maker to operate properly, water 
pressure of 20 ~ 125 psi (138 ~ 862 kPa) is 
required. 
If the refrigerator is installed in an area with low 
water pressure (below 20 psi), you can install a 
booster pump to compensate for the low pressure.  
After you have connected the water line, make 
sure the water storage tank inside the refrigerator 
is properly filled. 
To do this, press the water dispenser lever until 
water runs from the water dispenser. 
Water line installation kits are available at 
extra cost from your dealer. 
We recommend using a water supply kit 
that contains copper tubing.
The Samsung refrigerator warranty does 
not cover water line installation.  
We strongly recommend you have a 
plumber or authorized installer install the 
water line.
Connecting to the water supply line
1.  First, shut off the main water supply line and 
turn the ice-maker off.
The refrigerator should NOT be plugged in 
at this point.
2.  Locate the nearest cold water drinking water 
line.
3.  Install the pipe clamp and shut off valve.
4.  Connect the water line installation kit to the 
shut off valve.
Shut off valve
Pipe clamp
Cold water line
Water line installation kit
DA68-02976A-04.indb   19
14. 10. 15.   �� 7:32