Samsung NE59J7850WS/AA Manuel Du Propriétaire
28 English
Cooktop cooking
C
ookt
op c
ooking
About the radiant surface elements
The temperature rises gradually and evenly.
As the temperature rises, the radiant
element will glow red. To maintain the
selected setting, the element will cycle on
and off. The heating element retains enough
heat to provide a uniform and consistent
heat during the off cycle. For efficient
cooking, turn off the element several
minutes before cooking is complete. This will
allow residual heat to complete the cooking
process.
As the temperature rises, the radiant
element will glow red. To maintain the
selected setting, the element will cycle on
and off. The heating element retains enough
heat to provide a uniform and consistent
heat during the off cycle. For efficient
cooking, turn off the element several
minutes before cooking is complete. This will
allow residual heat to complete the cooking
process.
NOTE
Radiant elements have a limiter that allows
the element to cycle ON and OFF, even
at the HI setting. This helps to prevent
damage to the ceramic cooktop. Cycling at
the HI setting is normal and can occur if
the cookware is too small for the radiant
element or if the cookware bottom is not
flat.
the element to cycle ON and OFF, even
at the HI setting. This helps to prevent
damage to the ceramic cooktop. Cycling at
the HI setting is normal and can occur if
the cookware is too small for the radiant
element or if the cookware bottom is not
flat.
01 Left Front: 7”, 1,800 W (Bridge 2,600W)
02 Left Rear: 7”, 1,800 W
03 Right Front: 6”/9”/12”, 3,000 W
04 Right Rear: 6”, 1,200 W
05 Warming center: 100 W
06 Hot surface indicator
07 Cooktop on indicator
Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown
below.
below.
01
01
06
07
02
05
04
03
NE59J7850WS_AA_DG68-XXXXXX_EN.indd 28
2015-01-21 11:24:05