Samsung RF34H9950S4/AA Manuel D’Utilisation
English - 25
OPERA
TING
( 6 )
Door Alarm
Door
Alarm
The Door Alarm button lets you turn the
door alarm on and off.
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left
open for more than two minutes.The
beeping stops when you close the door.
The Door Alarm function is pre-set to
On in the factory. You can turn it off by
touching and then releasing this button.
You can turn it back on in the same
fashion. The icon lights up when the
function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.
door alarm on and off.
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left
open for more than two minutes.The
beeping stops when you close the door.
The Door Alarm function is pre-set to
On in the factory. You can turn it off by
touching and then releasing this button.
You can turn it back on in the same
fashion. The icon lights up when the
function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.
( 7 )
Main Control Panel Lock (3 sec)
Control
Lock
Touch and hold the Control Lock button
for 3 seconds to lock the Main Control
Panel. If the Main Control Lock is on,
none of the buttons on the Main Control
Panel work.
(However, the dispenser control panel
and the dispenser level will continue to
work, because the dispenser control
panel has its own, independent Control
Lock button.)
To unlock the Main Control Panel, touch
and hold the main Control Lock button
for 3 seconds again.
for 3 seconds to lock the Main Control
Panel. If the Main Control Lock is on,
none of the buttons on the Main Control
Panel work.
(However, the dispenser control panel
and the dispenser level will continue to
work, because the dispenser control
panel has its own, independent Control
Lock button.)
To unlock the Main Control Panel, touch
and hold the main Control Lock button
for 3 seconds again.
• The Main Control Panel locks
automatically one minute after
the last button input, after you
have set Main Lock Control
on.
the last button input, after you
have set Main Lock Control
on.
• If you Lock the Dispenser
Control Panel, the Lock Icon
(
) on the STAR DISPLAY
is displayed. The Dispenser
Control Lock doesn't affect
the Main Control Panel. The
Main Control Panel has its
own lock button.
If you lock the Main Control
Panel, the dot on the Main
Control Lock doesn't affect
the Main Control Panel. The
Main Control Panel has its
own lock button.
If you lock the Main Control
Panel, the dot on the Main
Control Lock (
) lights.
Cooling Off Mode
-
North American (US, Canada) Models Only ;
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they are
displaying refrigerators on the shop fl oor. In
Cooling Off mode, the refrigerator’s fan motor and
lights work normally, but the compressors do not
run, and the refrigerator and freezer do not get
cold. To start Cooling Off mode, touch and hold
the Fridge, Freezer, and Door Alarm buttons for 5
seconds during normal operation. The refrigerator
chime sounds and the temperature display
fl ashes “OFF”. The Star Display blinks slowly on
and off when the refrigerator is in Cooling Off
mode (17 seconds on, 3 seconds off).
To cancel Cooling Off mode, touch and hold the
Fridge, Freezer, and Door Alarm buttons again for
5 seconds.
is designed for use by retailers when they are
displaying refrigerators on the shop fl oor. In
Cooling Off mode, the refrigerator’s fan motor and
lights work normally, but the compressors do not
run, and the refrigerator and freezer do not get
cold. To start Cooling Off mode, touch and hold
the Fridge, Freezer, and Door Alarm buttons for 5
seconds during normal operation. The refrigerator
chime sounds and the temperature display
fl ashes “OFF”. The Star Display blinks slowly on
and off when the refrigerator is in Cooling Off
mode (17 seconds on, 3 seconds off).
To cancel Cooling Off mode, touch and hold the
Fridge, Freezer, and Door Alarm buttons again for
5 seconds.
( 8 )
Override (3 sec)
The Override function activates/
deactivates Smart Grid (page 27).
Touch and hold the Override button
for 3 seconds to set/clear the Override
function.
deactivates Smart Grid (page 27).
Touch and hold the Override button
for 3 seconds to set/clear the Override
function.
DA68-03013A-11.indb 25
DA68-03013A-11.indb 25
2015. 3. 5.
6:10
2015. 3. 5.
6:10