Whirlpool WGE755C0BS Manuel De Montage

4. Attach terminal lugs to line 1 (black), neutral (white), and line 2 

(red) wires. Loosen (do not remove) the setscrew on the front of 
the terminal lug and insert exposed wire end through bottom of 
terminal lugs. Securely tighten setscrew to XX lbs-in. torque. 
See Bare Wire Torque Specifications chart.

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

5. Use Phillips screwdriver to connect the bare (green) ground 

wire to the range with the ground-link screw. The ground wire 
must be attached first and must not contact any other terminal.

6. Use 

³⁄₈" nut driver to connect the neutral (white) wire to the 

center terminal block post with one of the 10-32 hex nuts.

7. Connect line 1 (black) and line 2 (red) wires to the outer terminal 

block posts with 10-32 hex nuts.

8. Securely tighten hex nuts.
9. Replace terminal block access cover.

Use this method only if local codes permit connecting ground 
conductor to neutral supply wire.
1. Pull the conduit through the hole and conduit plate on bottom 

of range. Allow enough slack to easily attach the wiring to the 
terminal block.

2. Attach terminal lugs to line 1 (black), bare (green) ground, and 

line 2 (red) wires. Loosen (do not remove) the setscrew on the 
front of the terminal lug and insert exposed wire end through 
bottom of terminal lugs. Securely tighten setscrew to 
XX lbs-in. torque. See Bare Wire Torque Specifications chart.

8 gauge copper

25 lbs-in. (2.8 N-m)

6 gauge aluminum

35 lbs-in. (4.0 N-m)

A

B

C

D

E

B

A

G

E

C

D

F

A

B

C

D

E

F

A

B

C

D

E