Yamaha YSP-2500 Manuel Du Propriétaire
PREPARATIONS
➤ Installation
En
20
2
Attach the template supplied with this unit to the wall and use a thumbtack or pin to mark the position where screws will be inserted in the wall.
3
Mount the wall mount bracket on the wall.
Template
Attach the template to the wall so that the center of
the template is aligned with the center of the TV.
the template is aligned with the center of the TV.
The wall mount bracket is designed to be offset
slightly to the right of the center of this unit.
slightly to the right of the center of this unit.
Once screw position has been
marked, remove the template.
marked, remove the template.
Screw self-tapping screws (not supplied) partway
into the wall where marked using the template.
into the wall where marked using the template.
Mount the wall mount bracket on these
screws, and then tighten the screws.
screws, and then tighten the screws.
Screw self-tapping screws, at least six including the
two previously used, into as many holes around the
outer edges of the wall mount bracket as possible to
ensure sufficient strength.
two previously used, into as many holes around the
outer edges of the wall mount bracket as possible to
ensure sufficient strength.