Frigidaire FGIF3061NF Manuel Du Propriétaire

19

The oven control is preset to display °F (Fahrenheit) when

shipped from the factory.

When the range is first powered up, “12:00” will flash in the

display (See Fig. 1).
To set the clock to 1:30:

1. Press set clock.

2. Enter 1:30.

3. Press start.

The oven control has a factory preset built-in 6 Hour Energy

Saving feature that will turn off the oven if  it is left on for

more than 6 hours. The control can be programmed to

override this feature to continuously bake.
To turn off 6-Hour Energy saving mode:

1. Press and hold timer on•off

for 6 seconds.

2. Press self-clean

to toggle between “6 Hr OFF”

(Fig. 2) or “StAY On” (Fig. 3).

Select “StAY On” to turn off

6-Hour Energy Saving mode.

3. Press start to accept.

Fig. 2

Fig. 3

The clock display mode allows you to choose between 12 or

24 hr mode. The factory pre-set clock display mode is 12

hr.  See the example below to change the default mode to

24 hr display.
To set 12 or 24 hour mode:

1. Press and hold set clock

     

for 6 seconds.

2. Press self-clean

to toggle between “12 Hr dAY”

or “24 Hr dAY” display modes

(See Figs. 4 & 5).

3. Press start to accept.

1. Press and hold broil for

6 seconds.

2. Press self-clean to toggle

between “FAhrn ht” or

“CELSIUS” temperature display

modes (Figs. 6 & 7).

If Celsius display is needed, select

“CELSIUS”.

3. Press start to accept.

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 1

It is recommended to always set the clock for the correct

time of day before using the appliance. The clock cannot

be changed if any timed or delayed time feature is active.