Samsung MC11H6033CT/AA Manuel D’Utilisation
English - 13
03
O
VEN USE
CHECKING IF YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to confirm that your oven is working
correctly at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on
the page 35-36.
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the upper side of the door.
Place a glass of water on the turntable. Close the door.
Press the START/+30s button and set the time to 4 or
5 minutes by pressing the START/+30s button the appropriate
number of times.
Result: The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
SETTING THE TIME
Your microwave oven has an built-in clock. When power is supplied, “:0”, “88:88”, or
“12:00” is automatically displayed on the display.
The time can be displayed in 12-hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. To display the time in the 12-hour notation, press the Clock
button.
2. Turn the Dial knob to set the hour.
3. Press the Clock button.
4. Turn the Dial knob to set the minute.
5. When the right time is displayed, press the Clock button to
start the clock.
Result: The time is displayed whenever you are not
using the microwave oven.
MC11H6033CT_AA_DE68-04173L-01_EN.indd 13
2014-07-01 �� 5:26:10