Maytag MED4200BW Manuel De Montage

Using a TORX T25 screwdriver, remove the 2 screws securing 

the  door strike to the door frame of the dryer. Rotate the 

strike 180° and attach to the opposite side of dryer door 

frame, as shown.

Position the door with the inside of the door facing up. Using  

a Phillips screwdriver, remove the 10 screws securing the 

inner door to the outer door. Lift off the inner door and set 

aside. 

IMPORTANT: If the protective film has not yet been removed 

from the dryer, peel the film from the dryer door before 

proceeding.

Using a TORX

 

T25 screwdriver, remove the 4 screws securing 

the door hinge to the dryer and lift up and out to remove the 

door. Place the door on a soft towel or other non-scratch 

surface. Reinstall the 4 screws in the holes. 

#2 Phillips screwdriver

Min. 8" long TORX

® †

 

T25 screwdriver

† ® TORX is a registered trademark of Saturn Fasteners, Inc.

The following instructions are for models with a round and 

square-shaped doors.