HP OJ4650 Guide D’Installation Rapide

 • Confirm that wireless is enabled on your printer.

1.  From the printer control panel, touch   (Wireless).
2.  If it shows Wireless Off, touch   (Settings), and then turn wireless on. 

 • Confirm that your printer is connected to your network.

1.  From your printer control panel, touch   (Wireless).
2.  Touch   (Settings).
3.  Touch Print Reports, and then touch Wireless Test Report. The Wireless Test Report is automatically printed.
4.  Check the top of the report to see if something failed during the test.

 

– See the DIAGNOSTICS RESULTS section for all tests that were performed, to determine whether or not your 

printer passed.

 

– From the CURRENT CONFIGURATION section, find out the Network Name (SSID) to which your printer is 

currently connected. Make sure that the printer is connected to the same network as your computer.

5.  If a print report indicates the printer is not connected to the network, touch   (Wireless), then touch  

 (Settings), and touch Wireless Setup Wizard to connect the printer to the network.

Note: If your computer is connected to a Virtual Private Network (VPN), temporarily disconnect from the VPN 

before proceeding with the installation. After installation you will need to disconnect from the VPN to access 

your printer over your home network.

 • Make sure security software is not blocking communication over your network.

Security software, such as firewalls, can block communication between your computer and printer when 

installing over a network. If your printer cannot be found, temporarily disable your firewall and check if the 

problem goes away. For more help and tips on security software, go to: www.hp.com/go/wpc-firewall.

 • Restart components of the wireless network.

Turn off the router and the printer, and then turn them back on in this order: router first and then printer. 

Sometimes, turning off devices and then turning them back on helps resolve network communication issues. 

If you still cannot connect, turn off the router, the printer, and the computer, and then turn them back on in this 

order: router first, then printer, and then computer.
If you still have problems, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting). This 

website contains the most complete, up-to-date information about wireless printing, as well as information to 

help you prepare your wireless network; solve problems when connecting the printer to the wireless network; 

and resolve security software issues.
Note: If you are using a computer running Windows, you can use the Print and Scan Doctor tool, which can help 

solve many problems you might have with the printer. To download this tool, visit www.hp.com/go/tools.

First install your printer on your home network. After you have successfully connected your printer to your home 

network, you can share your printer with other computers on the same network. For each additional computer 

you only need to install the HP printer software. You can also print from mobile devices connected to your home 

network. For Android 4.0 devices and higher, install the HP Print Pluggin or ePrint application. For iOS devices, you 

can use Airprint.

www.hp.com/go/wirelessprinting
The HP Wireless Printing Center at www.hp.com/go/wirelessprinting can help you prepare your wireless network, 

set up or reconfigure your printer, and troubleshoot networking problems.