Beats by Dr. Dre MH812AM/A Manuel Du Propriétaire
4
English
Setting up your Pill
1. POWER ON/OFF
To turn on your Pill™, press and release the power button. The “b” will light up
and an audio cue will indicate the system is on. To turn the Pill™ off, press and
release the power button. The “b” will fade out indicating power is off.
and an audio cue will indicate the system is on. To turn the Pill™ off, press and
release the power button. The “b” will fade out indicating power is off.
2. BLUETOOTH®
Pairing: For Bluetooth® pairing, press and hold the “b” for 3 secs. The
Bluetooth® LED on the back of the Pill™ will blink WHITE rapidly indicating
device is in pairing mode. Disconnect by holding 3 secs again.
Bluetooth® LED on the back of the Pill™ will blink WHITE rapidly indicating
device is in pairing mode. Disconnect by holding 3 secs again.
Connected: Once Pill™ is successfully paired and connected, the LED will glow
solid WHITE. *Note: Pill™ can remember up to 8 paired devices in its memory
and will try to connect with most recent.
solid WHITE. *Note: Pill™ can remember up to 8 paired devices in its memory
and will try to connect with most recent.
3. NFC
Connecting: If using a device that is NFC (Near Field Communication)
enabled, turn on NFC, then simply touch the device to the Pill™ on the NFC
logo to quickly make a connection.
enabled, turn on NFC, then simply touch the device to the Pill™ on the NFC
logo to quickly make a connection.
Takeover: If the Pill™ is already connected to a Bluetooth® device, one can
take over the connection by NFC touch.
take over the connection by NFC touch.
4. AUX INPUT
To play audio using the audio cable, plug the cable from the audio device to the
“IN” jack on the back of the Pill™.
“IN” jack on the back of the Pill™.