Marvel 23-Bottle Wine Cooler w/MicroSentry - Black Cabinet and Stainless Steel Frame Glass Door Manuel D’Utilisation

Page de 48
TROUBLESHOOTING YOUR WINE CELLAR 
22
Problem
Possible Cause
Remedy
Unit not cold enough.
Adjust temperatures (See “Set Tempera-
tures” on page 6).
•  Control set too warm.
•  Content temperature not stabilized.
•  Excessive usage or prolonged door 
openings.
•  Airflow to front grille blocked.
 
•  Door gasket not sealing properly.
•  Adjust temperature colder. Allow 24 
hours for temperature to stabilize.
•  Allow temperature to stabilize for at 
least 24 hours, with minimal door 
openings.
•  Airflow must not be obstructed to 
front grille. See “clearances” on 
        page 4.
•  Check door alignment and/or adjust 
or replace door gasket.
Unit too cold.
Adjust temperatures (See “Set Tempera-
tures” on page 6).
•  Control set too cold.
•  Door gasket not sealing properly.
•  Adjust temperature warmer. (See 
page 6, “set temperature”). Allow 24 
hours for temperature to stabilize.
•  Check door alignment and/or adjust 
or replace door gasket.
No interior light.
•  Failed light bulb.
•  Replace light bulb, see page 21.
Light will not go out when door is closed.
•  Door not activating light switch.
•  Verify cabinet is level, refer to page 4 
for leveling instructions.
•  Verify the door is aligned properly, 
refer to page 15 for instructions.
Noise or Vibration.
•  Unit not level.
•  Level unit, see “Leveling Legs” on 
page 4.
Unit will not run.
•  Unit turned off.
•  Power cord not plugged in.
•  No power at outlet.
•  Turn unit on. See “Start your Appli-
ance” on page 6.
•  Plug in power cord.
•  Check house circuit.
Before You Call for Service
If the unit appears to be malfunctioning, read through this 
manual first. If the problem persists, check the troubleshooting 
guide below. Locate the problem in the guide and refer to the 
cause and its remedy before calling for service. The problem may 
be something very simple that can be solved without a service 
call. However, it may be required to contact your dealer or a 
qualified service technician.
Electrocution Hazard
 - Never attempt to repair or perform 
maintenance on the unit until the main electrical power has 
been disconnected. Turning the unit control “OFF” does not 
remove electrical power from the units wiring.
For Your Records
Date of Purchase
Dealer’s name
Dealer’s Address
Dealer’s City
Dealer’s State
Dealer’s Zip Code
Appliance Serial Number
Appliance Service Number
Date Warranty Card Sent (Must be 
within 10 days of purchase).
If Service is Required:
•  If the product is within the first year warranty period please 
contact your dealer or call AGA MARVEL Customer Service 
at 800.223.3900 for directions on how to obtain warranty 
coverage in your area.
•  If the product is outside the first year warranty period, AGA 
MARVEL Customer Service can provide recommendations of 
service centers in your area. A listing of authorized service 
centers is also available at www.agamarvel.com under the 
service and support section.
•  In all correspondence regarding service, be sure to give the 
service number, serial number, located on your product’s 
serial plate, (see page 3) and proof of purchase.
•  Try to have information or description of nature of the prob-
lem, how long the unit has been running, the room temper-
ature, and any additional information that may be helpful in 
quickly solving the problem.
•  Table D is provided for recording pertinent information 
regarding your product for future reference.
Table D