WineMate Wine Cooling Unit - Rear Exhaust Guide De Montage
• Move the cooling unit towards the mounting sides and push to press the
gasket.
• Locate the 2 brackets (6) and use 7/16” wrench to tighten the 2 screws (7).
• If top exhaust, install the top exhaust grille at the top of the cabinet with
the arrow towards the front and facing down the cabinet.
• Plug the Wine-mate cooling unit in receptacle.
• Screw the 2 screws (4) and locate the light on the ceiling.
• Plug the light in receptacle.
• Plug the wine cellar.
3. Electrical Cord
• We strongly recommend against the use of an extension cord. However, if
you still select to use an extension cord, it is absolutely necessary that it is
a UL LISTED 3-wire grounding type appliance extension cord. The
marked rating of the extension cord should be 115 V, 15 A. or equivalent
and not greater than 15ft in length.
a UL LISTED 3-wire grounding type appliance extension cord. The
marked rating of the extension cord should be 115 V, 15 A. or equivalent
and not greater than 15ft in length.
- 3 -