Summit 17.7 Cu. Ft. Commercial Frost-Free Upright Freezer Manuel D’Utilisation
6
SUMMIT APPLIANCE
Digital Thermostat Instructions
If you find that it is necessary to change the temperature setting for your
digital thermostat controlled freezer, please refer to the following in-
structions. The front panel of the thermostat is illustrated here:
digital thermostat controlled freezer, please refer to the following in-
structions. The front panel of the thermostat is illustrated here:
To see the SETPOINT:
Push and immediately release the SET key -the display will show the
SET point value. Wait 5 seconds and the probe value will display again.
To change the SETPOINT:
Push and hold the SET key for more then 2 seconds to change the set
point value; The value of the set point will be displayed, and the
“snowflake” LED will start blinking.
To change the SET value:
Push the up or down arrows to the desired setting; The new setting will
be memorized after 15 seconds, provided no other keys are pushed.
FREEZER CARE
Cleaning Your Frost-Free Freezer
Explosion Hazard
Use nonflammable cleaner.
Frost-free means that you do not have to defrost your freezer.
Explosion Hazard
Use nonflammable cleaner.
Frost-free means that you do not have to defrost your freezer.
Frost is removed by air moving and collecting any moisture and
depositing it on the cooling coil. The cooling coil periodically
warms up enough to melt the frost, and the water then flows down
depositing it on the cooling coil. The cooling coil periodically
warms up enough to melt the frost, and the water then flows down
to the drain pan (located behind the base grill) where it is evapo-
rated.
rated.
Complete cleaning should be done at least once a year.
1. Unplug freezer or disconnect power.
2. Remove all substances.
3. Wash the inside walls with a solution of mild detergent in warm
water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm water.
melting
snowflake
snowflake
Up & Down arrows
“SET” key
7
SUMMIT APPLIANCE
• Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes, concentrated
scouring cleansers, flammable fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers containing petroleum products on
plastic parts, interior and door liners or gaskets. Do not use paper
towels, scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
plastic parts, interior and door liners or gaskets. Do not use paper
towels, scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
4. Rinse well and wipe dry with a clean soft cloth.
5. Use the appropriate cleaning method for your exterior finish.
Painted metal: Wash exteriors with a clean sponge or soft cloth and
a mild detergent in warm water. Do not use abrasive or harsh clean-
ers, or cleaners designed for stainless steel. Dry thoroughly with a
soft cloth. For additional protection against damage to painted metal
exteriors, apply appliance wax (or auto paste wax) with a clean, soft
ers, or cleaners designed for stainless steel. Dry thoroughly with a
soft cloth. For additional protection against damage to painted metal
exteriors, apply appliance wax (or auto paste wax) with a clean, soft
cloth. Do not wax plastic parts.
6. Plug in freezer or reconnect power.
7. Replace all containers.
7. Replace all containers.
Base Grill
To Remove and Replace the Base Grill:
1. Open the freezer door and remove the base grill by pulling down
and out from the top.
and out from the top.
2. Replace the base grill by putting the clips in the openings in the
freezer panel. Push in until the base grill snaps into place.
Changing the light bulb
NOTE: Not all appliance bulbs will fit your freezer. Be sure to re-
place the bulb with one of the same size, shape, and wattage.
1. Unplug freezer or disconnect power.
2. Remove the light shield. From the front of the light shield, push
backward and down.
backward and down.
3. Replace the light bulb with an appliance bulb of the same wattage.
4. Replace the light shield.
5. Plug in freezer or reconnect power.