Electrolux EW30DS75KS Manuel Du Propriétaire

The cooktop is equipped with different sized 
burners.
The surface burners are located on the cooktop as 
follows (See Figure):
- a 

5 000 BTU (natural gas) burner located at the 

right rear position;

- a 

18 000 BTU (natural gas) burner located at 

the right front position;

- a 

9 500 BTU (natural gas) burner located at the 

left front position;

- a 

16 000 BTU (natural gas) burner located at 

the left rear position;

- a 

9 500 BTU (natural gas) burner located at the 

center position.

For the 18 000 BTU burner:
Place the burner head over the gas orifi ce (Figure 
2). Be careful not to damage the electrode while 
placing the burner head over the orifi ce. Make 
sure electrode fi ts correctly into slot in burner head.
For all burners:
Place a burner cap on each burner head (see 
Figure 1), matching the cap size to the head size. 
The cap for each burner has an inner locating 
ring which centers the cap correctly on the burner 
head. Be sure that all the burner caps and burner 
heads are correctly placed BEFORE using your 
appliance.

Make sure each burner cap is properly aligned and 
level.
Turn the burner on to determine if it will light. If the 
burner does not light, contact a Service Center. Do 
not service the sealed burner yourself.

The color of the fl ame is the key to proper burner 
adjustment. A good fl ame is clear, blue and hardly 
visible in a well-lighted room. Each cone of fl ame 
should be steady and sharply defi ned. Adjust or 
clean burner if fl ame is yellow-orange. To clean 
burner, see instructions under General Care & 
Cleaning.