Midland Radio 1001Z Manuel D’Utilisation
8
Midland MODEL 1001Z CB Operating controls
FRONT PANEL CONTROLS
ON/OFF VOLUME: In the off position your transceiver power is off. Turn
this control clockwise to switch on the unit and adjust the volume.
this control clockwise to switch on the unit and adjust the volume.
SQUELCH CONTROL: Adjust this control until background noise just
disappears. If the control is adjusted too far clockwise it may cause
muting of weaker signals.
disappears. If the control is adjusted too far clockwise it may cause
muting of weaker signals.
S/RF POWER METER: This display is used in receiving to indicate the
relative signal strength of incoming signals. When transmitting, it shows RF
power output.
relative signal strength of incoming signals. When transmitting, it shows RF
power output.
PA/CB Switch: When in PA mode, it causes your voice to operate the
optional external PA speaker. In CB mode, the microphone operates the
transmitter.
optional external PA speaker. In CB mode, the microphone operates the
transmitter.
MICROPHONE CONNECTOR: Plug in the supplied microphone to this
connector. Received signals will not be heard without the microphone.
connector. Received signals will not be heard without the microphone.
CHANNEL KNOB: This easy-to-operate control allows changing of CB
channels, either up or down.
channels, either up or down.
CHANNEL INDICATOR: The LED displays the channel number.
TX LED: indicator for showing the unit is transmitting.