Eddie Bauer enRoute Manuel D’Utilisation
Troubleshooting
1.
If your child restraint is not held securely
by the vehicle belt:
Remove all the slack in the vehicle belt. Make sure the belt
buckle is not up against the child restraint where the belt
cannot be tightened. If you cannot secure the child restraint
tightly, move it to another seating location.
Remove all the slack in the vehicle belt. Make sure the belt
buckle is not up against the child restraint where the belt
cannot be tightened. If you cannot secure the child restraint
tightly, move it to another seating location.
2.
If the shoulder belt crosses the child’s neck
when using the child restraint:
Try moving the child restraint toward the center of vehicle
or move the vehicle seat forward or back. Check to see if
your vehicle has adjustable shoulder belt anchor points. Do
Not place the shoulder belt behind the child.
Try moving the child restraint toward the center of vehicle
or move the vehicle seat forward or back. Check to see if
your vehicle has adjustable shoulder belt anchor points. Do
Not place the shoulder belt behind the child.
23
22
7
From the back of
headrest, pull pad out
from behind the pad
locking tabs
headrest, pull pad out
from behind the pad
locking tabs
8
Pull pad off of headrest.
NOTE:
Do not remove
foam headrest.
Clean with warm sudsy
water, rinse clean and air
dry. Do not use bleach or
other harsh cleaners.
water, rinse clean and air
dry. Do not use bleach or
other harsh cleaners.
Replace the pad by
reversing the order.
Attach head rest pad to
the headrest, replace the
backrest pad and base
pad.
reversing the order.
Attach head rest pad to
the headrest, replace the
backrest pad and base
pad.
4358-4294 enRoute 5/18/07 7:44 AM Page 25