Cuisinart CBT-700 Series Manuel D’Utilisation

Page de 25
2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always 
be followed, including the following:
 1.  READ ALL INSTRUCTIONS BEFORE USING.
 2.   
To protect against the risk of electrical shock, do not put motor base 
of blender in water or other liquid.
 3.   
Close supervision is necessary when any appliance is used by 
or near children.
 4.   
Unplug from outlet when not in use, before putting on or taking 
off parts, and before cleaning or removing contents from blender 
jar. Never put hands into the blender jar or container, or handle 
the blades with appliance plugged in.
  5.   Avoid contact with moving parts.
 6.   
Do not operate any appliance with a damaged cord or plug or 
after the appliance malfunctions, or is dropped or damaged in 
any manner. Return appliance to nearest Cuisinart
®
 service 
facility for examination, repair, and/or mechanical or electrical 
adjustment.
 7.   
The use of attachments, including canning or ordinary jars, not    
recommended or sold by Cuisinart may cause fire, electrical  
 
shock, or risk of injury to persons.
  8.   Do not use outdoors.
 9.   
Do not let cord hang over edge of counter or table or touch 
hot surfaces.
 10.     Keep hands and utensils out of jar while blending, to  
 
reduce the risk of severe injury to persons or damage to  
blender itself. 
A rubber or plastic spatula may be used but  
 
must be used only when the blender is turned off.
 11.     When blender is in On mode, and LED lights are flashing or  
 
glowing, do not touch cutting assembly, interfere with blade  
 
movement, or remove blender jar cover. Accidentally touching    
a speed button may activate the blender.
 12.  BLADES ARE SHARP. HANDLE CAREFULLY.
 13.     To reduce the risk of injury, never place cutting assembly on  
 
base unless the blender jar is properly attached.
 14.   Always operate blender with the cover in place. 
 
 15.   Never leave your blender unattended while it is running.
 16. 
   
Twist on locking ring firmly. Injury can result if moving blades 
accidentally become exposed. 
17.    When blending hot liquids, remove measured lid (center piece of 
cover) to allow steam to escape.
 18.     Do not use a extension cord with this unit. Doing so may result in fire, 
electrical shock, or personal injury. 
 19.     Wash the blender jar, cutting assembly, locking ring, and cover    
before first use.
 20.     WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK 
OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER  
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE  
DONE ONLY BY AUTHORIZED PERSONNEL.
 21.     WARNING: FLASHING LIGHT INDICATES READY TO OPERATE. 
DO NOT TOUCH BLADES.
22.  
Do not operate your appliance in an appliance garage or 
 
  under a wall cabinet. When storing in an appliance garage  
 
  always unplug the unit from the electrical outlet. Not doing  
 
  so could create a risk of fire, especially if the appliance 
 
  touches the walls of the garage or the door touches the unit as  
  
it 
closes. 
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
This appliance comes with a resettable thermal fuse to prevent damage
to the motor in the case of extreme overload. Should the unit shut off
unexpectedly, unplug it and let it cool for at least 15 minutes before
continuing (see “To reset the unit,” #5 on page 6).
UNPACKING INSTRUCTIONS
1.  Place the box containing your Cuisinart
®
 PowerEdge
®
 700-Watt Blender 
on a flat, sturdy surface before unpacking.
 
2.  Remove instruction booklet and other printed materials from top of 
corrugated insert. Next remove the top corrugated insert.