Q-Logic 59047-10 D Manuel D’Utilisation

Page de 264
5–Fabric Element MIB Objects
FxPort Physical Level Table
5-14
59047-10  D
FxPort Physical Level Table
The objects described in this section are in table format indexed by switch index 
and port index. An example of how to access one of these objects is: "snmpget 
localhost public fcFxPortPhysAdminStatus.1.1". This table contains one entry for 
each FxPort in the Fabric Element, the physical level status, and parameters of 
the FxPorts.
This table contains one entry for each FxPort in the Fabric Element, and the 
physical level status and parameters of the FxPorts.
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
The desired state of the FxPort. A management station may place the FxPort in a 
desired state by setting this object accordingly. The testing(3) state indicates that 
no operational frames can be passed. When a Fabric Element initializes, all 
FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of 
either explicit management action or per configuration information accessible by 
the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the 
online(1) or testing(3) states, or remains in the offline state.
Syntax
INTEGER {
online(1), - place port online
offline(2), - take port offline
testing(3) - initiate test procedures
}
Access
read-write
Status
current
Return Value
Refer to 
 for fcFxPortPhysAdminStatus read values.
Refer to 
 for fcFxPortPhysAdminStatus write values.
Table 5-4. fcFxPortPhysAdminStatus Read Return Values 
Port
Value
Online
online (1)
Offline
offline (2)
Diagnostics
testing (3)
Down
offline (2)