Q-Logic 59047-10 D Manuel D’Utilisation
3–MIB-II Objects
ipRouteMask (1.3.6.1.2.1.4.21.1.11)
3-26
59047-10 D
ipRouteMask (1.3.6.1.2.1.4.21.1.11)
Indicate the mask to be logical-ANDed with the destination address before being
compared to the value in the ipRouteDest field.
compared to the value in the ipRouteDest field.
Syntax
IpAddress
Access
read-write
Status
mandatory
Return Value
Writes not supported.
ipRouteMetric5 (1.3.6.1.2.1.4.21.1.12)
An alternate routing metric for this route. The semantics of this metric are
determined by the routing-protocol specified in the route's ipRouteProto value. If
this metric is not used, its value should be set to -1.
determined by the routing-protocol specified in the route's ipRouteProto value. If
this metric is not used, its value should be set to -1.
Syntax
INTEGER
Access
read-write
Status
mandatory
Return Value
Writes not supported.
ipRouteInfo (1.3.6.1.2.1.4.21.1.13)
A reference to MIB definitions specific to the particular routing protocol which is
responsible for this route, as determined by the value specified in the route's
ipRouteProto value. If this information is not present, its value should be set to the
OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier. Any
conformant implementation of ASN.1 and BER must be able to generate and
recognize this value.
responsible for this route, as determined by the value specified in the route's
ipRouteProto value. If this information is not present, its value should be set to the
OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier. Any
conformant implementation of ASN.1 and BER must be able to generate and
recognize this value.
Syntax
OBJECT IDENTIFIER
Access
read-only
Status
mandatory