ATTO Technology 1500D/E Manuel D’Utilisation
25
ATTO Technology Inc. iPBridge Installation and Operation Manual
2.2.2 General use commands
These CLI commands are used in a variety of situations
Help
Displays a list of available commands. If command name
is specified, displays detailed command-specific
information.
is specified, displays detailed command-specific
information.
Immediate command: Help [command name]
Password
Specifies a password for all sessions: Telnet, FTP and
ExpressNAV web-based interface. You will be prompted
for the current password, to enter the new password, and
to confirm the new password. Passwords are case
sensitive, 0-32 characters with no spaces.An empty
password can be configured by entering the Password
confirmation prompts with no parameters. The command
ExpressNAV web-based interface. You will be prompted
for the current password, to enter the new password, and
to confirm the new password. Passwords are case
sensitive, 0-32 characters with no spaces.An empty
password can be configured by entering the Password
confirmation prompts with no parameters. The command
RestoreConfiguration default
sets the password to its
default value.
Default: Password
Set syntax: set Password
Requires a SaveConfiguration command
Set syntax: set Password
Requires a SaveConfiguration command
ReadOnlyPassword
Specifies a read only password for all sessions: Telnet,
FTP and ExpressNAV web-based interface. You will be
prompted for the current password, to enter the new
password, and to confirm the new password. Passwords
are case sensitive, 0-32 characters with no spaces.An
empty password can be configured by entering the
Password confirmation prompts with no parameters. The
command
FTP and ExpressNAV web-based interface. You will be
prompted for the current password, to enter the new
password, and to confirm the new password. Passwords
are case sensitive, 0-32 characters with no spaces.An
empty password can be configured by entering the
Password confirmation prompts with no parameters. The
command
RestoreConfiguration default
sets the
password to its default value.
Default: Password
Set syntax: set ReadOnlyPassword
Requires a SaveConfiguration command
Set syntax: set ReadOnlyPassword
Requires a SaveConfiguration command
ReadOnlyUsername
Specifies a read only username for all Telnet, FTP and
ExpressNAV web server sessions. Username is case
insensitive, 1-32 characters with no spaces.
ExpressNAV web server sessions. Username is case
insensitive, 1-32 characters with no spaces.
Default: user
Set syntax: set ReadOnlyUsername [username]
Requires a SaveConfiguration command
Get syntax: get Username
Set syntax: set ReadOnlyUsername [username]
Requires a SaveConfiguration command
Get syntax: get Username
RestoreConfiguration
Restores configuration to either the default configuration
or the configuration last saved into non-volatile memory.
The saved option will undo any changes made since the
last save.
or the configuration last saved into non-volatile memory.
The saved option will undo any changes made since the
last save.
Immediate command: RestoreConfiguration [Default |
Saved]
Saved]
SaveConfiguration
Many commands require a SaveConfiguration command
to be executed. This will be indicated by the return
to be executed. This will be indicated by the return
Ready. *.
When you invoke
SaveConfiguration
, the current
configuration is permanently saved in the iPBridge and
the new configuration becomes the active configuration.
the new configuration becomes the active configuration.
If a firmware restart is required to make the requested
change permanent, you will see a prompt asking you to
confirm the restart. You can override this request by
indicating the override value on the command line.
change permanent, you will see a prompt asking you to
confirm the restart. You can override this request by
indicating the override value on the command line.
You may make several changes through commands and
SaveConfiguration
before implementing the restart, but
once you have restarted the iPBridge, all the command
changes created before the restart and save will be
implemented. If you select the restart option, the iPBridge
will execute its complete start up cycle.
changes created before the restart and save will be
implemented. If you select the restart option, the iPBridge
will execute its complete start up cycle.
Restart
or
no Restart
parameter is optional
Immediate command: SaveConfiguration <Restart|
NoRestart>
NoRestart>
Username
Specifies a username for all Telnet, FTP and ExpressNAV
web server sessions. Username is case insensitive, 1-32
characters with no spaces. You must be using the Admin
password to change Username.
web server sessions. Username is case insensitive, 1-32
characters with no spaces. You must be using the Admin
password to change Username.
Default: root
Set syntax: set Username [username]
Requires entering a password
Requires a SaveConfiguration command
Get syntax: get Username
Set syntax: set Username [username]
Requires entering a password
Requires a SaveConfiguration command
Get syntax: get Username