ADC T1MF2S04RA Manuel D’Utilisation
2-6
Adapter Bracket Mounting Procedure (ETSI-style Equipment Rack)
To mount the adapter brackets for a 600-mm ETSI-style Equipment Rack, mount the HMS-318 List 3 shelf to the
adapter brackets as described in this procedure.
adapter brackets as described in this procedure.
Perform the following procedure to mount the HMS-318 List 3 shelf to the adapter brackets for a 600-mm ETSI-style
equipment rack.
equipment rack.
Step
Action
1
Locate the mounting holes of the HMS-318 List 3 shelf for the desired rack width 23 inches (58.4 cm) and
position (2- or 5-inch recess mounting).
position (2- or 5-inch recess mounting).
2
Align each adapter bracket with the HMS-318 List 3 shelf and attach to the desired rack width 23 inches
(58.4 cm) and position (2- or 5-inch recess mounting) with the #6-32 x .25 inch screws (provided).
(58.4 cm) and position (2- or 5-inch recess mounting) with the #6-32 x .25 inch screws (provided).
3
Insert the screws (4 places) and tighten using a #2 Phillips screwdriver.
4
Repeat for the other adapter bracket.
5
You are now ready to install the HMS-318 List 3 shelf into the telco-style rack (see
Note:
As mentioned in
and
, the adapter brackets are attached to the HMS-318 List 3 shelf at the factory for a 19-
inch telco-style equipment rack. When disassembling the brackets from the shelf, ensure that you place the
appropriate hardware (screws, washers, and so on) you remove in a convenient sealed package for
possible re-assembly later.
appropriate hardware (screws, washers, and so on) you remove in a convenient sealed package for
possible re-assembly later.
Note:
When mounting a 19-inch (48.3-cm) HMS-318 List 3 shelf into a 600-mm ETSI-style equipment rack,
use the adapter brackets provided (see
and
).
Step
Action
1
Locate the mounting holes of the HMS-318 List 3 shelf for the desired rack width 23 inches (58.4 cm) and
position (2- or 5-inch recess mounting).
position (2- or 5-inch recess mounting).
2
Align each adapter bracket with the HMS-318 List 3 shelf and attach to the desired rack width 23 inches
(58.4 cm) and position (2- or 5-inch recess mounting) with the #6-32 x .25 inch screws (provided).
(58.4 cm) and position (2- or 5-inch recess mounting) with the #6-32 x .25 inch screws (provided).
3
Insert the screws (4 places) and tighten using a #2 Phillips screwdriver.
4
Repeat for the other adapter bracket.
5
You are now ready to install the HMS-318 List 3 shelf into the ETSI-style rack (see