ADC Campus-REX2 RS Manuel D’Utilisation

Upgrade the Campus-REX2 software as follows:

Open a DOS window (Windows-based PC) or command shell 
(Unix/Linux-based PC).

Change directory to a directory where you will copy the file containing 
the upgrade software (carex2_Vx.y.tar) and subsequently execute the 
FTP commands below.  For example:

Copy the upgrade software file (carex2_Vx.y.tar) to this directory.

At the DOS prompt, start FTP using the configured LAN IP address of 
the Campus-REX2.  For example:

A message indicating successful connection to the LAN IP address 
follows.  If this does not occur, verify that you have correctly entered the 
LAN IP address

FTP then prompts for a user name and password to connect FTP to the 
Campus-REX2.  For example:

Password: admin (or previously configured REX2 password; see 

When FTP is successfully connected to the Campus-REX2, FTP displays 
the "ftp>" prompt.

At the FTP prompt, set the file type that FTP will use to transfer the 
upgrade software file, as follows:

At the FTP prompt, enter the command to transfer the upgrade software 
file (carex2_Vx.y.tar) to the Campus-REX2, for example:

If the transfer is successful, a "Store complete" message is displayed, 
along with transfer statistics.  If the transfer is unsuccessful, one or more 
error messages may be displayed, and the FTP connection is terminated.  
In the case of a failed transfer, verify that the upgrade software filename 
has been entered correctly.