Sony PCNA-MR10 Manuel
RoomLink User Guide
20
Front panel
The front panel contains the power button, infrared receiver, and status
indicators.
indicators.
Network media receiver (front panel)
1
POWER/REC indicator
The indicator is white while the power is on. The indicator is red during
TV recording. The indicator blinks (red) during firmware updates.
The indicator is white while the power is on. The indicator is red during
TV recording. The indicator blinks (red) during firmware updates.
2
Infrared receiver
Enables communication between the RoomLink™ unit and the Remote
Commander® unit. (Do not block the area in front of the infrared
receiver.)
Enables communication between the RoomLink™ unit and the Remote
Commander® unit. (Do not block the area in front of the infrared
receiver.)
3
Power button/Stand by indicator
Turns RoomLink™ on and off. Indicator is dimmed (red) when the unit
is in Stand by mode.
Turns RoomLink™ on and off. Indicator is dimmed (red) when the unit
is in Stand by mode.
✍
When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned
on. The Standby indicator takes approximately 20 seconds to light after the AC adapter
is plugged into a wall outlet.
on. The Standby indicator takes approximately 20 seconds to light after the AC adapter
is plugged into a wall outlet.