Emerson MMI-20019043 Manuel D’Utilisation

11.2.1

Smart Meter Verification requirements

To use Smart Meter Verification, the transmitter must be paired with an enhanced core
processor, and the Smart Meter Verification option must be ordered for the transmitter.

communication tool needed to support Smart Meter Verification. (If you are going to
perform Smart Meter Verification using the display, only the transmitter and enhanced
core processor versions apply.)

Transmitter

6.0

Enhanced core processor

3.6

ProLink II

2.9

ProLink III

1.0

Field Communicator

HART device description: device rev 6, DD rev 2

If your devices or tools do not meet the minimum version requirements for Smart Meter
Verification, you still may have access to an older version of meter verification if the option
was ordered for your transmitter. See 

between the older meter verification and the newer Smart Meter Verification.

Measurement inter-
ruption

Suspended during the test (3 mi-
nutes)

No interruption necessary

Result storage

No results stored in the transmitter Last 20 results stored in the trans-

mitter

Results reporting

Pass/fail/abort

Pass/fail/abort, abort code, com-
parison tables and graphs for stor-
ed test results

(1)

Test start methods

Manual only

Manual, scheduled, event-based

11.2.2

Smart Meter Verification test preparation

Although it is not necessary to match factory conditions or change the transmitter's
configuration during a Smart Meter Verification test, the test will run more smoothly when
conditions are stable.

Measurement support

174