Shark S3901D Manuel D’Utilisation

11. 

DO NOT unplug by pulling on power 
cord. To unplug, grasp the plug not 
the power cord.  Do not use extension 
cords or outlets with inadequate 
current carrying capacity.

12. 

DO NOT put any objects into openings. 
Do not use with any opening that is 
blocked.

13. 

DO NOT put hands or feet under the 
steam mop. Unit gets very hot.

14.  In mop mode use 

ONLY on flat, 

horizontal surfaces. Do not use on 
walls, counters or windows.

15. 

DO NOT use on leather, wax polished 
furniture or floors, synthetic fabrics, 
velvet or other delicate, steam sensitive 
materials.

16. 

DO NOT add cleaning solutions, 
scented perfumes, oils or any other 
chemicals to the water used in this 
appliance as this may damage the unit 
or make it unsafe for use. If you live in a 
hard water area, we recommend using 
distilled water in your steam mop.

17.  When in use, NEVER turn the appliance 

over or on its side. 

18. 

19.  Carefully remove the micro-fiber 

cleaning pad immediately after you 
have unplugged and allowed the steam 
mop to cool.

20. When cleaning the steam mop, unplug 

the power cord from the electrical 
outlet and clean with a dry or damp 
cloth. Do not pour water or use alcohol, 
benzene or paint thinner on the unit. 

21.  Extreme caution should be 

exercised when using this 
appliance to clean stairs.

22. Never use steam mop without  

micro-fiber cleaning pad attached.

23. Keep your work area well lit.

24. Store steam mop indoors in a cool,  

dry place.

25. To avoid circuit overload, do not 

operate another appliance on the 
same socket (circuit) as the steam 
cleaner.

26. If an extension cord is absolutely 

necessary, an extension cord rated 
a minimum  of 15 ampere, 14 gage 
cord should be used. Cords rated 
for less amperage may overheat. 
Care should be taken to arrange 
cord so that it cannot be pulled or 
tripped over.

27  Always unplug and allow the steam 

mop to cool before removing or 
changing mop heads.

 

WARNING: Your steam mop 
is designed to clean hard floor 
surfaces that will withstand high 
heat. Do not use on unsealed wood 
or unglazed ceramic floors. On 
surfaces that have been treated 
with wax or some no wax floors, 
the sheen may be removed by the 
heat and steam action. It is always 
recommended to test an isolated 
area of the surface to be cleaned 
before proceeding. We also 
recommend that you check the use 
and care instructions from the floor 
manufacturer.

S3901D_11_IB_E_110704_2.indd   3

11-07-04   11:07 AM