Mitsubishi Electronics DX-TL16U Manuel D’Utilisation

Digital Video Recorder 

 21

 
 
Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow buttons to adjust the length 
of time recorded data will be kept from 1 to 99 days.  The DVR automatically deletes video recorded earlier 
than the user-defined period under three conditions: at midnight, whenever the system reboots or whenever 
the user changes the Auto Deletion settings.  Selecting Never will disable the Auto Deletion function. 

 

Highlighting Use Panic Recording and pressing the 

 button toggles between On and Off. 

 

Highlight the box beside Panic Recording – Duration and set the duration of panic recording.  Panic 
recording will stop automatically after the preset duration as long as the 

Panic

 button is not pressed to stop 

the panic recording.  You can set the dwell from 5 minutes to 1 hour.  Select No Limit if you want to stop 
panic recording manually. 

 

Highlighting the box beside Panic Recording – ips and pressing the 

 button allows you to set the images 

per second for Panic recording.  You can select from 0.10 to 30.0 (25.0 PAL) images per second. 

 

Highlighting the box beside Panic Recording – Quality and pressing the 

 button allows you to set the 

recorded image quality for Panic recording.  You can select from:  Very High, High, Standard and Low. 

 

You can save your Record settings by highlighting Save and pressing the 

 button.  Selecting Cancel exits 

the screen without saving the changes. 
 
Schedule Settings (RECORD 

 Schedule Tab) 

 

Setting up the Basic Schedule… 

 

 

 

Figure 12 

─ Schedule (Basic) setup screen. 

 

Highlight the box beside Schedule Type and press the 

 button.  Selecting Basic allows you to set up 

the Basic recording schedule. 

 

Highlighting the box beside Record Mode and pressing the 

 button allows you to select the desired 

recording mode. (–

 : No record, 

: Time (Time-lapse) recording, 

: Event recording, 

  : Time & Event recording

) 

 

  When the DVR is in the No Record mode, it will not record during the preset day and time range as long as 

the 

Panic

 button is not pressed.  Use the No Record mode when you do NOT want the DVR to record during 

certain times. 

  When the DVR is in the Time mode, the   icon displays at the top-left corner of the screen.  The DVR will 

record and displays the   icon at the top-left corner of the screen during the scheduled times. 

  When the DVR is in the Event mode, the red   icon displays at the top-left corner of the screen.  The DVR 

will record and displays the   icon at the top-left corner of the screen when any event occurs.  When the DVR 
is in the Pre-Event recoding mode, the yellow   icon displays when there is no event, and the DVR is not 
recording.  When the DVR is in the Pre-Event mode, the red   and   display when any event occurs and 
the DVR starts recoding.