Mitsubishi Electronics DX-TL16U Manuel D’Utilisation

User’s Manual 

 

26

 
 
Alarm-In Settings (EVENT 

 Alarm-In Tab) 

 

 

 

Figure 16 

─ Alarm-In setup screen. 

 
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.  You can set up 
each input on the Alarm-In screen.  You can turn each input On or Off by highlighting the alarm number 
and pressing the 

 button. 

 

Each input can be given a title.  Highlight the desired Title box and press the 

 button.  A virtual keyboard 

appears allowing you to enter a title name. 

 

Each input can be set as NO (normally open) or NC (normally closed). 

 

You can set the actions the DVR will take whenever it senses an input on one of its alarm input connectors.  
Highlighting the box under the Actions heading and pressing the 

 button allows you to set up event actions 

for alarm input.

 

 

 Record ─ Select the cameras that you want the DVR to record whenever it detects an input on the associated 

alarm input. 

 Alarm-Out ─ Select between Alarm Output and Beep (DVR’s internal buzzer) that you would like to activate 

and to sound whenever the DVR detects an input on the associated alarm input.

 

 

 Notify ─ You can toggle the individual notification items On and Off by highlighting that item and pressing 

the 

 button.  Highlight OK and press the 

 button to accept your changes. 

 PTZ ─ Select the preset position for each PTZ camera, where you want PTZ cameras to move to whenever 

the DVR detects an input on the associated alarm input. 

 Spot Monitor ─ Associate a camera with the Spot monitor.  The DVR will display the associated camera on 

the Spot monitor whenever it detects an input on the associated alarm input. 

 

 

 

 

You can save your Alarm-In changes by highlighting Save and pressing the 

 button.  Selecting Cancel 

exits the screen without saving the changes.