Omega Vehicle Security OM-550 Manuel D’Utilisation
OM-550
u
18
u
3.0 SET-UP
This section provides the necessary information to set the OM-550 up for proper
operation.
operation.
3.1 POWER CONNECTION
As previously discussed there are several options to supply power to the OM-550 and
the following sections explain how to use them.
the following sections explain how to use them.
3.1.1 BATTERY INSTALLATION
Slide the battery cover open and insert the batteries as shown below. Replace the
cover and turn the unit “ON: by pressing the ON-OFF key. The OM-550 will then
activate and initiate printer activity. If the OM-550 does not respond, ensure that the
batteries are properly positioned.
cover and turn the unit “ON: by pressing the ON-OFF key. The OM-550 will then
activate and initiate printer activity. If the OM-550 does not respond, ensure that the
batteries are properly positioned.
When the batteries have been removed from the OM-550 for an extended period,
the unit may activate (printer activity may begin) immediately upon insertion of
the batteries, without pressing the ON-OFF key.
the unit may activate (printer activity may begin) immediately upon insertion of
the batteries, without pressing the ON-OFF key.
Figure 3-1