Canon LV-8225 Manuel D'Instructions

39

This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

Provide the image in its original size. When the 

original  image size is larger or smaller than the 

screen size (180 x 800), the projector enters to the 

panning  mode  automatically. Use the Point ▲▼◄► 

buttons to pan the image. When adjusted, the arrows 

will turn red. When reached to the correction limits, 

the arrows will disappear.

Provide the full screen image. 



  • This projector cannot display any resolution 

higher than 190 x 100. If your computer’s 

screen resolution is higher than it, reset the 

resolution to the lower before connecting to 

the projector.

  • The image data in other than 180x800 is 

modified to fit the screen size in initial mode.

  • 

16:9, True and Digital zoom +/– are 

disabled and cannot be displayed when 

480i, 

575i, 480p, 575p, 720p, 1035i or 1080i is 

selected in the PC System Menu (p.31).

  • When 

True is selected in the Screen menu, 

Digital zoom +/- can not be selected.

Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

Screen and then press the Point ► or the OK 

button.

Use the Point ▲▼ buttons select the desired 

item and then press the OK button .

Provide the last stored aspect screen image. 

Provide the image at the 16:9 wide screen ratio.

Adjust the screen scale and position manually with 

this function. Press the Point

 

► button at 

Custom adj. 

and the Custom adjustment menu is displayed on the 

screen, you can use the Point ▲▼ buttons to choose 

the item you want to adjust.

 

Scale H/V ..........  Adjust the Horizontal/Vertical 

screen scale.

 

H&V ...................  When set to On, the aspect ratio 

is fixed. The 

Scale V appears 

dimmed and becomes unavailable. 

Adjust 

Scale H, then the screen 

scale is automatically modified 

based on the aspect ratio. 

 

Position H/V .....  Adjust the Horizontal/Vertical 

screen position.

 

Common ...........  Save the adjusted scale or position 

to all the inputs. Press the OK 

button at 

Common to display a 

confirmation box. To save the scale 

or position, press the OK button at 

“Yes”. When 

Custom is selected, 

the saved scale or position is used.

 

Reset .................  Reset the all adjusted values. 

Press the OK button at 

Reset to 

display a confirmation box. To 

reset, press the OK button at “Yes”.



  • When no signal is detected, 

Normal is set 

automatically .

  • The adjustable range for 

Scale H/V and 

Position H/V is limited depending on the 

input signal.

Scale the image proportionally to fit the entire screen. 

Either side of image may go over the screen.