Canon LV-8225 Manuel D'Instructions

65

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

The WARNING indicator shows the state of the function which protects the projector. Check the state of the 

WARNING indicator and the POWER indicator to take proper maintenance. 

When the temperature inside the projector reaches 

a certain level, the projector will be automatically 

shut down to protect the inside of the projector. The 

POWER indicator is blinking while the projector is 

being cooled down. When the projector has cooled 

down enough (to its normal operating temperature), 

it can be turned on again by pressing the POWER 

button.

When the projector detects an abnormal condition, it 

is automatically shut down to protect the inside of the 

projector and the WARNING indicator lights red. In 

this case, unplug the AC power cord and reconnect 

it, and then turn the projector on once again to verify 

operation. If the projector cannot be turned on and 

the WARNING indicator still lights red, unplug the AC 

power cord and contact the service center. 



The WARNING indicator continues to 

blink even after the temperature inside 

the projector returns to normal. When 

the projector is turned on again, the 

WARNING  indicator stops blinking. 

Then check the matters below:
–  Did you provide appropriate space for 

the projector to be ventilated? Check the 

installing condition to see if the air vents of 

the projector are not blocked.

–  Has the projector been installed near an Air-

Conditioning/ Heating Duct or Vent? Move 

the installation of the projector away from 

the duct or vent.

–  Is the filter clean? Clean the filter 

periodically.

WARNING 

blinking red

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

WARNING 

lights red