Canon LV-8225 Manuel D'Instructions

69

This  projector  uses  a  high-pressure  lamp  which  must  be  handled  carefully  and 

properly.  

Improper handling may result in accidents, injury, or create a fire hazard.

● �amp life may differ from lamp to lamp and according to the environment of use.

  Lamp life may differ from lamp to lamp and according to the environment of use. 

There  is  no  guarantee  of  the  same  life  for  each  lamp.  Some  lamps  may  fail  or 

terminate their life in a shorter period of time than other similar lamps.

●  If the projector indicates that the lamp should be replaced, i.e., if the �AMP

 If the projector indicates that the lamp should be replaced, i.e., if the LAMP 

REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after 

the projector has cooled down.  

    (Follow carefully the instructions in the Lamp Replacement section of this manual.) 

Continuous  use  of  the  lamp  with  the  LAMP  REPLACE  indicator  lighted  may 

increase the risk of lamp explosion.  

●  A �amp may explode as a result of vibration, shock or degradation as a result of

 A Lamp may explode as a result of vibration, shock or degradation as a result of 

hours of use as its lifetime draws to an end. Risk of explosion may differ according 

to the environment or conditions in which the projector and lamp are being used.

TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. 

Contact an authorized service center for a checkup of the unit and replacement of the 

lamp. Additionally, check carefully to ensure that there are no broken shards or pieces 

of glass around the projector or coming out from the cooling air circulation holes. Any 

broken shards found should be cleaned up carefully. No one should check the inside of 

the projector except those who are authorized trained technicians and who are familiar 

with projector service. Inappropriate attempts to service the unit by anyone, especially 

those who are not appropriately trained to do so, may result in an accident or injury 

caused by pieces of broken glass.  

Replacement lamp can be ordered through your dealer.  When ordering a projection lamp, give 
the following information to the dealer.

  ●   

  ●