Furuno GP32 Manuel D’Utilisation
6. ALARMS
32
6.6 Trip
Alarm
This alarm alerts you by aural and visual
alarms when your boat has traveled a
distance greater than the trip alarm distance.
1. Press the [MENU] key once or twice to
alarms when your boat has traveled a
distance greater than the trip alarm distance.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose TRIP and then press the [ENT]
3. Press the [ENT] key.
4. Choose TRIP and then press the [ENT]
key.
5. Choose ON and then press the [ENT] key.
6. Press the [ENT] key. Enter distance
6. Press the [ENT] key. Enter distance
desired (001-999 nm) with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message TRIP ALARM! and the alarm
icon appear.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message TRIP ALARM! and the alarm
icon appear.
6.7 Odometer
Alarm
This alarm alerts you by aural and visual
alarms when your boat has traveled the total
distance you set.
1. Press the [MENU] key once or twice to
alarms when your boat has traveled the total
distance you set.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose ODOMETER and then press the
3. Press the [ENT] key.
4. Choose ODOMETER and then press the
[ENT] key.
5. Choose ON and then press the [ENT] key.
6. Press the [ENT] key. Enter distance
6. Press the [ENT] key. Enter distance
desired (001-999 nm) with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message ODOMETER ALARM! and the
alarm icon appear.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message ODOMETER ALARM! and the
alarm icon appear.
6.8 Buzzer Type Selection
The buzzer sounds whenever an alarm
setting is violated. You can choose the type
of buzzer to use as follows:
1. Press the [MENU] key once or twice to
setting is violated. You can choose the type
of buzzer to use as follows:
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose BUZZER and then press the
3. Press the [ENT] key.
4. Choose BUZZER and then press the
[ENT] key.
SHORT
LONG
CONSTANT
CONSTANT
Buzzer sound options
5. Choose buzzer type desired and then
press the [ENT] key.
SHORT:
Two short beeps
LONG:
Three long beeps
CONSTANT:
Continuous beeps
6. Press the [MENU] key twice to finish.