Furuno GP32 Manuel D’Utilisation
7. OTHER FUNCTIONS
37
6. Choose a station from the list and then
press the [ENT] key. The display looks
something like the one below.
something like the one below.
FREQ :
310.0kHz
RATE :
200BPS
LAT
:
37
°
59'N
LON
:
123
°
00'W
EXIT? SAVE? ERASE?
Screen for entering DGPS station data
7. Choose item, press the [ENT] key, edit
data, and then press the [ENT] key.
8. Choose “SAVE?” and then press the
[ENT] key.
9. Press the [MENU] key twice to finish.
Erasing all user channels
1. Press the [MENU] key twice to open the
menu.
2. Choose DGPS/WAAS and then press the
[ENT] key.
3. Choose DGPS STATION and then press
the [ENT] key.
4. Choose LIST and then press the [ENT]
key.
5. Choose USER and then press the [ENT]
key.
6. Choose “CLR?” and then press the [ENT]
key. The following message appears.
ERASE ALL ?
ARE YOU SURE ?
YES
NO
DGPS channel erase options
7. Press ◄ to choose YES and then press
the [ENT] key.
8. Press the [MENU] key twice to finish.
Erasing individual user channels
1. Press the [MENU] key twice to open the
menu.
2. Choose DGPS/WAAS and then press the
[ENT] key.
3. Choose DGPS STATION and then press
the [ENT] key.
4. Choose LIST and then press the [ENT]
key.
5. Choose USER and then press the [ENT]
key.
6. Choose a channel from the list and then
press the [ENT] key.
7. Choose “ERASE?”.
8. Choose YES and then press the [ENT]
8. Choose YES and then press the [ENT]
key.
9. Press the [MENU] key twice to finish.
7.4 Bearing
Reference
Ship's course and bearing to a waypoint may
be displayed in true or magnetic bearing.
Magnetic bearing is true bearing plus (or
minus) earth’s magnetic deviation. Use the
bearing reference in accordance with the
compass interfaced: magnetic for magnetic
compass, true for gyrocompass. The default
setting displays magnetic bearings.
1. Press the [MENU] key once or twice to
be displayed in true or magnetic bearing.
Magnetic bearing is true bearing plus (or
minus) earth’s magnetic deviation. Use the
bearing reference in accordance with the
compass interfaced: magnetic for magnetic
compass, true for gyrocompass. The default
setting displays magnetic bearings.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose PLOTTER.
3. Press the [ENT] key.
4. Choose BRG. REF.
5. Press the [ENT] key.
3. Press the [ENT] key.
4. Choose BRG. REF.
5. Press the [ENT] key.
MAG
TRUE
Bearing reference options
6. Choose MAG or TRUE as appropriate.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.