TANDBERG 550 Manuel D’Utilisation
TANDBERG 1000/550 for Cisco
CallManager
31
Peripherals
Peripheral Equipment
This chapter will explain how to connect peripheral equipment to your system, such as computers and head-
sets.
sets.
COM port
T1000 for Cisco CallManager Peripheral Equipment
PC-interface (serial cable)
A PC can be connected to your T1000 for Cisco CallManager using a serial cable. This enables you to interact
with the unit using data port commands. (This is also possible over LAN, using telnet). The available commands
are specified in a separate document. See the illustration below on how to connect.
with the unit using data port commands. (This is also possible over LAN, using telnet). The available commands
are specified in a separate document. See the illustration below on how to connect.
Headset Interface
It is possible to use a headset with your T1000 for
Cisco CallManager. To enable audio to your headset,
press the large button in front of your unit.
Cisco CallManager. To enable audio to your headset,
press the large button in front of your unit.
Audio Mini-jack
Stereo jack (3.5mm) connector for headsets.
T
HE
ISDN
CONNECTORS
ARE
NOT
IN
USE
NOTE