Q-Logic 2400 Manuel D’Utilisation

5–Fibre Channel Noninteractive Commands

-tp (Display Host Topology)

SN0054667-00  C

5-35

Use the -tp option to show the topology configuration of the host:

# qaucli -pr fc -tp | topology

Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox) 
driver.

Use the -u option to update the firmware preload area of the adapter from a 
DAT file or to save the current firmware preload area of the adapter to a DAT file.

To update the adapter firmware preload table, issue the following command:

# qaucli -pr fc -u ( <hba instance> | <hba wwpn> ) <file name>

To save the current adapter firmware preload table to a DAT file, issue the 
following command:

# qaucli -pr fc -u ( <hba instance> | <hba wwpn> ) save <file name>

Where:



<hba instance> is the adapter instance number of an adapter port.



<hba wwpn> is the world wide port name of an adapter port.



<file name> is the name of the firmware preload table DAT file.

To show the version number of the QConvergeConsole CLI utility, issue the 
following command:

# qaucli -pr fc -v

This option is available only for QLE2562.

This option is valid only in noninteractive mode.