Q-Logic 2400 Manuel D’Utilisation

10–Converged Network Adapter Interactive Commands
Adapter Configuration

10-24

SN0054667-00  C

2. Adapter Configuration1. CNA Configuration

From the main menu, select the Adapter Configuration option, and then select 
the configuration type (CNA Configuration). The Converged Network Adapter 
(CNA) Protocol Type Selection menu presents options for FCoE, iSCSI, and NIC 
configuration. For example:

    Adapter Type Configuration Selection

    1:  CNA Configuration

        (p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
        Please Enter Selection: 1

    Converged Network Adapter (CNA) Protocol Type Selection

    1:  CNA FCoE Configuration
    2:  CNA iSCSI Configuration
    3:  CNA NIC Configuration

2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration

From the Converged Network Adapter (CNA) Protocol Type Selection menu, 
select the CNA FCoE Configuration option to open the Converged Network 
Adapter (CNA) FCoE Configuration menu with options to configure adapter 
parameters, target persistent binding, boot devices, virtual ports, driver 
parameters, and selective LUNs. Options to export a configuration and generate 
reports are also available. For example:

    Converged Network Adapter (CNA) FCoE Configuration

    1:  HBA Parameters
    2:  Target Persistent Binding
    3:  Boot Devices Configuration
    4:  Virtual Ports (NPIV)
    5:  Driver Parameters
    6:  Selective LUNs
    7:  Export (Save) Configuration
    8:  Generate Reports