Q-Logic 2400 Manuel D’Utilisation

10–Converged Network Adapter Interactive Commands

CNA FCoE Configuration

SN0054667-00  C

10-41

1. CNA FCoE Configuration5. Driver Parameters<port selection>1. Present persistently bound targets plus any 
new targets with driver defaults

From the Drive Settings Menu, select this option to view persistently bound target 
devices and new target devices with driver defaults. This setting affects the output 
from the 

 option (1. CNA FCoE Configuration42. Target 

Persistent Binding41. Display Configuration). You must select the 

 option to save changes to this option.

1. CNA FCoE Configuration5. Driver Parameters<port selection>2. Present persistently bound target(s) only

From the Drive Settings Menu, select this option to view persistently bound target 
devices only. This setting affects the output from the 

 

option (1. CNA FCoE Configuration42. Target Persistent Binding41. Display 
Configuration). You must select the 

 option to save changes to 

this option.

1. CNA FCoE Configuration5. Driver Parameters<port selection>3. Bind by World Wide Port Name

From the Drive Settings Menu, select the Bind by World Wide Port Name option 
to configure the CLI to bind ports by WWPN. This setting affects the 

 option (1. CNA FCoE Configuration42. Target Persistent Binding42. 

Bind Target(s)). You must select the 

 option to save changes to 

this option.

1. CNA FCoE Configuration5. Driver Parameters<port selection>4. Bind by Port ID

From the Drive Settings Menu, select the Bind by Port ID option to configure the 
CLI to bind target devices by port ID. This setting affects the 

 

option (1. CNA FCoE Configuration42. Target Persistent Binding42. Bind 
Target(s)). You must select the 

 option to save changes to this 

option.