3com WX1200 3CRWX120695A Manuel D’Utilisation

„

A vertical bar (|) separates mutually exclusive options within a list of 
possibilities. For example, you enter either enable or disable, not 
both, in the following command:

set port {enable | disable} port-list

Unless otherwise indicated, the MSS CLI accepts standard ASCII 
alphanumeric characters, except for tabs and spaces, and is 
case-insensitive. 

The CLI has specific notation requirements for MAC addresses, IP 
addresses, and masks, and allows you to group usernames, MAC 
addresses, virtual LAN (VLAN) names, and ports in a single command.

3Com recommends that you do not use the same name with different 
capitalizations for VLANs or access control lists (ACLs). For example, do 
not configure two separate VLANs with the names red and RED.

The CLI does not support the use of special characters including the 
following in any named elements such as SSIDs and VLANs: ampersand 
(&), angle brackets (< >), number sign (#), question mark (?), or quotation 
marks (“”). 

In addition, the CLI does not support the use of international characters 
such as the accented É in DÉCOR. 

MSS displays MAC addresses in hexadecimal numbers with a colon (:) 
delimiter between bytes — for example, 00:01:02:1a:00:01. You can 
enter MAC addresses with either hyphen (-) or colon (:) delimiters, but 
colons are preferred.

For shortcuts:

„

You can exclude leading zeros when typing a MAC address. MSS 
displays of MAC addresses include all leading zeros. 

„

In some specified commands, you can use the single-asterisk (*) 
wildcard character to represent from 1 byte to 5 bytes of a MAC 
address. (For more information, see “MAC Address Globs” on 
page 31.)