3com WX1200 3CRWX120695A Manuel D’Utilisation
392
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
mode disable
— Disables a radio.
Defaults — MAP access point radios are disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — To enable or disable one or more radios to which a profile is
assigned, use the set ap radio radio-profile command. To enable or
disable all radios that use a specific radio profile, use the set
radio-profile command.
assigned, use the set ap radio radio-profile command. To enable or
disable all radios that use a specific radio profile, use the set
radio-profile command.
Examples — The following command enables radio 1 on the MAP 1:
WX1200# set ap 1 radio 1 mode enable
success: change accepted.
The following command enables radio 2 on on MAP 1:
WX1200# set ap 1 radio 2 mode enable
success: change accepted.
See Also
set ap radio
radio-profile
radio-profile
Assigns a radio profile to a MAP radio and enables or disables the radio.
Syntax —
set ap {ap-number | auto} radio {1 | 2}
radio-profile name mode {enable | disable}
ap
ap-number
— Index value that indentifies the MAP on the WX.
radio 1
— Radio 1 of the MAP.
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)