3com WX1200 3CRWX120695A Manuel D’Utilisation

C

HAPTER

 11: M

ANAGED

 A

CCESS

 P

OINT

 C

OMMANDS

At the other end of the spectrum, when max strictness is specified, if an 
MAP radio has reached its maximum client load, MSS makes it invisible to 
new clients, causing them to attempt to connect to other MAP radios. In 
the event that all the MAP radios in the group have reached their 
maximum client load, then no new clients would be able to connect to 
the network.

The following command sets the RF load balancing strictness 

to the 

maximum setting:

WX# set load-balancing strictness max

Success: strictness set to "MAX"

„

„

„

„

Deprecated in MSS Verion 4.2. To configure radio data rates, see set 
service-profile transmit-rates on page 468.

Disables or reenables active RF detection scanning on the MAP radios 
managed by a radio profile. When active scanning is enabled, MAP radios 
look for rogue devices by sending probe any requests (probe requests 
with a null SSID name), to solicit probe responses from other access 
points. 

Passive scanning is always enabled and cannot be disabled. During 
passive scanning, radios look for rogues by listening for beacons and 
probe responses.

Syntax — 

set radio-profile name active-scan {enable | 

„

— Radio profile name.

„

— Configures radios to actively scan for rogues.