3com WX1200 3CRWX120695A Manuel D’Utilisation
set radio-profile auto-tune power-interval
407
Examples — The following command enables dynamic power tuning for
radios in the rp2 radio profile:
radios in the rp2 radio profile:
WX4400# set radio-profile rp2 auto-tune power-config enable
success: change accepted.
See Also
set radio-profile
auto-tune
power-interval
auto-tune
power-interval
Sets the interval at which RF Auto-Tuning decides whether to change the
power level on radios in a radio profile. At the end of each interval, MSS
processes the results of the RF scans performed during the previous
interval, and changes radio power levels if needed.
power level on radios in a radio profile. At the end of each interval, MSS
processes the results of the RF scans performed during the previous
interval, and changes radio power levels if needed.
Syntax —
set radio-profile name auto-tune
power-interval seconds
name
— Radio profile name.
seconds
— Number of seconds MSS waits before changing radio
power levels to adjust to RF changes, if needed. You can specify from
1 to 65535 seconds.
1 to 65535 seconds.
Defaults — The default power tuning interval is 600 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command sets the power interval for radios
in radio profile rp2 to 240 seconds:
in radio profile rp2 to 240 seconds:
WX4400# set radio-profile rp2 auto-tune power-interval 240
success: change accepted.