3com WX1200 3CRWX120695A Manuel D’Utilisation
set dot1x wep-rekey
611
Examples — Type the following command to set the number of seconds
before the WX switch retransmits an EAPoL packet to 300:
before the WX switch retransmits an EAPoL packet to 300:
WX4400# set dot1x tx-period 300
success: dot1x tx-period set to 300.
See Also
set dot1x
wep-rekey
wep-rekey
Enables or disables Wired Equivalency Privacy (WEP) rekeying for
broadcast and multicast encryption keys.
broadcast and multicast encryption keys.
Syntax —
set dot1X wep-rekey {enable | disable}
enable
— Causes the broadcast and multicast keys for WEP to be
rotated at an interval set by the set dot1x wep-rekey-period for each
radio, associated VLAN, and encryption type. The WX generates the
new broadcast and multicast keys and pushes the keys to the clients
via EAPoL key messages.
radio, associated VLAN, and encryption type. The WX generates the
new broadcast and multicast keys and pushes the keys to the clients
via EAPoL key messages.
disable
— WEP broadcast and multicast keys are never rotated.
Defaults — WEP key rotation is enabled, by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Reauthentication is not required for WEP key rotation to take
place. Broadcast and multicast keys are always rotated at the same time,
so all members of a given radio, VLAN, or encryption type receive the
new keys at the same time.
place. Broadcast and multicast keys are always rotated at the same time,
so all members of a given radio, VLAN, or encryption type receive the
new keys at the same time.
Examples — Type the following command to disable WEP key rotation:
WX4400# set dot1x wep-rekey disable
success: wep rekeying disabled
See Also