Omron CPM2B Manuel D’Utilisation

1. Press the CLR Key to bring up the initial display.
2. Input the address from which the search will begin and press the Down

Arrow Key. It is not necessary to input leading zeroes.

B

1

A

0

A

0

↓

00100READ

TIM          001

3. Input the instruction to be found and press the SRCH Key. In this case, the

search is for OUT 01000.
In this case, the next OUT 01000 instruction is at address 200, as shown
below.

OUT

B

1

A

0

A

0

A

0

SRCH

00200SRCH

OUT        01000

4. Press the Down Arrow Key to display the instruction’s operands or press the

SRCH Key to search for the next occurrence of the instruction.

5. The search will continue until an END instruction or the end of Program

Memory is reached. In this case, an END instruction was reached at
address 397.

SRCH

00397SRCH

END (001)00.4KW

Indicates the address
of END instruction.

Indicates the amount used by the user
program in units of 0.1 Kwords.

This operation is used to find occurrences of the specified operand bit in the pro-
gram and is possible in any mode.

OK

OK

OK

The ON/OFF status of any displayed bit will be shown if the PC is in RUN or
MONITOR mode.

1. Press the CLR Key to bring up the initial display.
2. Input the operand address. It is not necessary to input leading zeroes.

SHIFT

CONT

#

F

5

00000CONT SRCH

LD         00005

3. Press the SRCH Key to begin the search.

SRCH

00123CONT SRCH

LD         00005

4. Press the SRCH Key to search for the next occurrence of the operand bit.

SRCH

00255CONT SRCH

AND NOT    00005

5. The search will continue until an END instruction or the end of Program

Memory is reached. In this case, an END instruction was reached.

SRCH

00397CONT SRCH

END (001)00.4KW

Indicates the address
of END instruction.

Indicates the amount used by the user
program in units of 0.1 Kwords.