Coleman 9995A Manuel D’Utilisation

24"

REPRESENTATIVE

ILLUSTRATION

•  Installation must conform with local codes or, in the absence of local 

codes, with either the National Fuel Gas Code, ANSI Z223.1 (USA), 
CAN/CGA-B149.1, Natural Gas and Propane Installation Code 
(Canada).
To check local codes, see your local L.P. gas dealer or natural gas 
company listed in the Yellow Pages for recommended installation pro-
cedures and regulations.

This appliance is not to be installed in or on a recreational vehicle
and/or boat.

1. Always maintain a minimum clearance of 24 inches or 

60

cm from 

all sides of grill to any combustible construction. (Fig. 9)

2. Never locate grill under an unprotected combustible material or 

overhang which is connected to a building. (Fig. 9a)

3. Do not obstruct the flow of combustion and ventilation air.
4. Keep the ventilation opening(s) of the cylinder enclosure free and 

clear from debris.

5. Grill should be level and not facing directly into wind.

Keep any electrical supply cord away from any heated surface. During
assembly of grill and when attaching or replacing the L.P. gas cylinder,
insure that the gas supply hose is free of kinks and is at least 3" away
from hot surfaces such as the grill housing.