Furuno FM-8900S Manuel D’Utilisation

1.  OPERATIONAL OVERVIEW

of the system is as follows.
Transceiver unit = Analog wing handset >
Digital wing handset L = Digital wing handset R > Remote station 1 >
Remote station 2 > Remote station 3 > Remote station 4
If you hook off No.4 remote station, for example, "IN USE BY: HANDSET_P4" is dis-
played on other remote stations and "HANDSET_P4: OPERATION" on the transceiv-
er unit. However, you can hook off and use No.1 remote station.

The terminal which you operate has priority in the following conditions:

•  The handset goes off hook.
•  Display the menus or setting windows.
•  Display each function screen (for example, Log).
•  Switch the session.
•  Press a key or rotate the CHANNEL/ENTER knob. (The priority is lost after four sec-

onds.)

1. Disconnect the power plug of a remote station to turn off the remote station.
2. While pressing the MENU key of a remote station, connect the plug to turn on the 

power.

3. Enter the terminal ID, using the 1 to 6 keys, then press the ENTER key. Do not 

assign the same number to multiple remote stations.

4. Turn off and on the power of the transceiver unit.

The built-in intercom permits voice communications between two terminals.

You can call over the intercom in on or off hook condition.

1. Press the MENU key to open the [MENU] screen.

2. Rotate the CHANNEL/ENTER knob to select [INTERCOM] 

then push the knob.

3. Rotate the CHANNEL/ENTER knob to select 

the called party’s terminal then push the knob.
The called party’s terminal rings.
To cancel calling, press the CANCEL key.