Furuno FM-8900S Manuel D’Utilisation

5.  MENU OPERATION

You can turn on or off memory channels on the [MEMORY CONFIG] screen. You can 
not turn off CH 16.

1. Rotate the CHANNEL/ENTER knob to select [CH MODE] on the [MENU] screen 

then push the knob.

2. Rotate the CHANNEL/ENTER knob to select [MEMORY CONFIG] then push the 

knob. The list for memory config appears.

3. Press the 4 or 6 key to switch the channel region.
4. When there are multiple pages, press the 1 key for the previous page and the 3 

key for the next page.

5. Rotate the CHANNEL/ENTER knob to select the channel number then push the 

knob or the 8 key. Below is the example screen for the channel number 01 select-
ed. The exclamation mark (!) and [ON] are displayed at each side of the selected 
channel number.

To erase a channel, select a channel to erase then push the CHANNEL/ENTER 
knob or the 8 key. The exclamation mark (!) and [ON] at each side of the selected 
channel number disappear.

6. Press the MENU key to save the setting.

7. Rotate the CHANNEL/ENTER knob to select [Yes] 

then push the knob.
To cancel the setting, press the CANCEL key instead of 
the MENU key at step 6. The message as shown in the 
right figure appears.

8. Rotate the CHANNEL/ENTER knob to select [Yes] then 

push the knob.

Channel region