Furuno FM-8900S Manuel D’Utilisation

5.  MENU OPERATION

4. Rotate the CHANNEL/ENTER knob to select the character to edit then press the 

appropriate numeric key. To delete a character, rotate the CHANNEL/ENTER 
knob to select the character to delete then press the CANCEL key.

5. Push the CHANNEL/ENTER knob.
6. Repeat steps 3 to 5 to name another terminal.

The channel can be automatically set to CH16 when the handset is on hooked.

1. Rotate the CHANNEL/ENTER knob to select [SYSTEM] on the [MENU] screen 

then push the knob.

2. Rotate the CHANNEL/ENTER knob to se-

lect [AUTO REVERT] then push the knob.

3. Rotate the CHANNEL/ENTER knob to select [MAIN] (for the main unit) or [RE-

MOTE] (for the remote handset) then push the knob.

4. For [MAIN], rotate the CHANNEL/ENTER knob to select [RT+DSC], [RT] or [OFF] 

then push the knob.
[RT+DSC]: Automatic switching to CH16 for all sessions
[RT]: Automatic switching to CH16 for the stand-by mode, the RT screen and the 
active RT session
[OFF]: No automatic switching
For [REMOTE], rotate the CHANNEL/ENTER knob to select [ON] or [OFF] then 
push the knob.
[ON]: Automatic switching to CH16 for the RT session
[OFF]: No automatic switching

Note: This function is not available during DW, scanning or PSTN.

The [EXTERNAL ALARM] menu enables/disables output of the contact signal for ur-
gency, safety and routine messages to an external alarm system.

1. Rotate the CHANNEL/ENTER knob to select [SYSTEM] on the [MENU] screen 

then push the knob.

2. Rotate the CHANNEL/ENTER knob to se-

lect [EXTERNAL ALARM] then push the 
knob.

3. Rotate the CHANNEL/ENTER knob to select [URGENCY], [SAFETY] or [ROU-

TINE] then push the knob.

4. Rotate the CHANNEL/ENTER knob to select [ON] or [OFF] then push the knob.

1. Rotate the CHANNEL/ENTER knob to select “F”. 

2. Press the appropriate numeric key (in this case, 

the 2 key) to change “F” to “A”.

Note: Each time you press the 2 key, the character changes in the sequence of 
“A” 

 “B” 

 “C” 

 “2” 

 “A” 

 ...