Multiquip LT12D Manuel D’Utilisation

14. 

— Always attach safety chain to the 

towing vehicle. Never tow the light tower with the safety 
chain unattached.

15. 

— Attach this coupler to the 

towing vehicle. Use only the specifi ed ball diameter 
as indicated on your coupler. Use of any other ball 
diameter will create an extremely dangerous condition 
which can result in separation of the coupler and ball 
or ball failure.

16. 

— Use this winch to raise the 

mast to the vertical position.

17. 

— Pull this pin to start placing 

the tower mast in the vertical position. When tower 
mast has reached full vertical position, insert pin to 
keep mast from falling.

18. 

— Used to tie down light tower with 

strap or chains to allow even application of force to the 
front and rear of the equipment during transport.

19. 

— This light illuminates the license plate. 

Whenever towing of the light tower is required, make 
sure this light is operational.

20. 

— Before towing the light tower, make 

sure that these lights are operational and are working 
correctly. Never tow the light tower if these lights are 
inoperative.

21. 

— Directs engine exhaust to 

the rear of the light tower. NEVER block this exhaust 
pipe with obstructions. ALWAYS place the generator 
in an area free of obstructions.

22. 

— This light tower uses a ST175-13C size tire. 

Replace with only recommended tire size. Never tow 
light tower with bad or worn tires.

23. 

— Contains information 

regarding the light tower.

24. — 

This 

twist-lock 

receptacle provides 240 VAC, 25 amps.

25. 

— This GFCI receptacle 

provides 120 VAC, 15 amps.

REAR
VIEW

22

19

23

25

24

FRONT

VIEW

20

21